Metal Roof Replacement in Dothan, AL

Many Dothan homeowners decide on metal when their shingle roof is worn out or storm damaged, and they would rather not repeat the job in 15 years. Others own an older metal roof with rusted panels or failed fasteners that is past repairing. Either way, call (334) 432-8483 and we will connect you with an independent local metal roofing contractor for an inspection and a written quote. We are a referral service, not the roofing company.

Signs it is time to replace

• Shingles that are curling, cracking, missing or shedding granules into the gutters
• Leaks in more than one spot, or stains on ceilings after storms
• Soft or sagging spots in the roof deck
• A shingle roof that is 15 to 20 years old or more in this climate
• An old metal roof with widespread rust-through, loose panels or failing seams
• Wind or hail damage your insurance adjuster has recommended replacing

Tear-off or install over existing shingles?

This is the biggest decision in a shingle-to-metal conversion, and there is no single right answer.

Tear-off (removing the shingles)

The contractor strips the roof to the deck, replaces any rotten plywood and installs new underlayment and metal. This costs more, but it lets everyone see the deck, catches hidden rot, and gives the cleanest result. It is usually required for standing seam and is the safer choice if the old roof has leaked.

Installing over existing shingles

In some cases exposed-fastener panels can go over a single layer of shingles, often on wood strips called purlins or furring. This saves on tear-off and dump fees. The trade-offs: hidden damage stays hidden, the roof carries more weight, and building codes generally limit how many layers a roof can have. Ask the contractor whether going over is allowed for your home and whether it affects the panel manufacturer's warranty.

How a replacement is done

1. Inspection. The contractor checks the deck from the attic and the roof, measures, and talks through panel options.
2. Written quote. A good quote spells out tear-off or go-over, decking allowance, underlayment, panel type and gauge, trim, and cleanup.
3. Permit and materials. The contractor confirms any permit and orders panels and trim in your color.
4. Tear-off and dry-in. Old roofing comes off one section at a time and new underlayment goes down the same day.
5. Metal installation. Trim, panels, flashing, pipe boots and ridge cap are installed.
6. Final walk-through. Check flashing details, gutters, and the yard for debris and screws.

Typical replacement costs

These are typical national-guide ranges for an average home with about 2,000 square feet of roof. Your quote will vary.

What drives the cost

The type of panel matters most: standing seam is often about twice the price of exposed-fastener panels. After that, roof size, pitch, number of valleys and penetrations, how many layers come off, and how much decking is rotten all move the price. Removing an old metal roof can cost more than removing shingles, since panels must be unscrewed and hauled away. Ask whether the quote includes new gutters or gutter reset.

How long it takes

An average conversion takes about three to seven working days on site. Lead time for panels and trim adds one to four weeks. After a major storm, demand jumps and schedules stretch, so get on a contractor's list early.

Insurance and storm damage

If wind or hail damaged your roof, call your insurer first and document the damage with photos. A contractor can meet the adjuster and point out damage. Replacing a shingle roof with metal may cost more than the claim pays, and you would cover the difference. Some insurers offer credits for impact-rated or FORTIFIED roofs, so ask.

Dothan homes and conversions

Dothan has a mix of brick ranch homes from the 1960s through the 1980s, newer subdivisions, and older houses near downtown. Many ranch homes have simple, low-to-medium pitch roofs that convert to metal efficiently. Older homes may hide multiple shingle layers or plank decking, which changes the plan. Attic ventilation is often undersized in older homes; a replacement is the best time to fix it with a vented ridge and proper intake at the eaves.

Alabama generally requires residential home improvement contractors to be licensed by the Alabama Home Builders Licensure Board for larger jobs, and a metal roof on a house is almost always a larger job. Ask any contractor for the license and a current certificate of insurance (general liability and workers' compensation), and check the license yourself. Inside the city limits, ask whether a City of Dothan building permit is required and who pulls it; outside the city, ask about Houston County or your town's rules.

Call (334) 432-8483 to get connected for an inspection and quote.

Frequently asked questions

Areas we serve

We connect callers across Dothan, Enterprise, Ozark, Headland and the Wiregrass of southeast Alabama, including:

• Dothan
• Enterprise
• Ozark
• Headland
• Taylor
• Kinsey
• Cowarts
• Ashford
• Webb
• Rehobeth
• Newton
• Daleville
• Abbeville
• Houston County
• Dale County

Local pages: Enterprise, Ozark, Headland.

Related services

• Standing Seam Metal Roofs
• Exposed-Fastener, Corrugated & 5V
• Barns, Shops & Commercial
• Metal Roof Repair & Leaks
• Metal Roof Coatings & Restoration